User's Manual

TECOM CO., LTD.
23, R&D ROAD 2, SBIP
HSIN-CHU, TAIWAN, ROC
PHONE: [phone]
FAX: [phone]
Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Date: Jul. 23, 2004
Author: SOHO Department, CPE R&D Division, TECOM Revision: 03
Email: [e-mail] Page:11/26
You can select [YES] to de-register, or [NO] to exit this mode.
Press [F3] (the same as [OK] key) to confirm, the LCD will display: (e.g. [YES])
If the de-registration is successful, the LCD will display:
If the de-registration fails after about 20-30 seconds, the Handset LCD will display:
Note:
1. Using the method-A or B, the system must be in idle mode.
2. Using the method-A,
a) If base can’t link to handset, the handset still will be de-registered.
b) If base de-registers one handset only and the handset doesn’t receive de-registration
command from base, the handset will still link with base unit. But it can’t use the system.
3. Using the method-B,
a) The base doesn’t need to enter the de-registration mode.
b) The handset unit must be moved to near the base to receive de-registration command from
base unit.
c) Only one handset can de-register to the base at a time.
4. After de-registration, the handset LCD will display:
(( ))
DE-REGISTERING.
PLEASE WAIT!
(( ))
DE-REGISTER
OK!
(( ))
FAILED!
TRY AGAIN!