User's Manual

TECOM CO., LTD.
23, R&D ROAD 2, SBIP
HSIN-CHU, TAIWAN, ROC
PHONE: [phone]
FAX: [phone]
Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Date: Jul. 23, 2004
Author: SOHO Department, CPE R&D Division, TECOM Revision: 03
Email: [e-mail] Page:10/26
Note: The LED on the base will flash [Fast] when enter the de-registration mode.
(4) Finally, change the DIP SWITCH on the base changes to normal mode.
(All switches are OFF)
Note: The LED on the base will flash [Normally] when the unit comes back to normal mode.
Operation Procedure for Method-B (Using the base and handset):
(1) The base is in the idle mode.
(2) The handset is in standby, press and hold the [F1] key over 1 second to enter [PROGRAM
MODE] and then select the corresponding item (De-register Mode), the LCD will display:
Press [F3] (the same as [OK] key) to enter the mode, the LCD will display:
Press [F1/F2] key to select the [YES?] mode.
1 2 3
ON
(( ))
>DE-REGISTER
VIBRATION
(( ))
DE-REGISTER
NO?
(( ))
DE-REGISTER
YE
S
?