User Manual

VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION
DOCUMENT NO.
VT40-2421 MMI REV NO.
4
PAGE
28 of 43
26. TONE FUNCTION
If you have pulse service and wish to access a computer or
calling service that use tone.
1. On line, and dialed digits in pulse. The LCD will display
Fig. 63
2. Press [TONE] (same as [*]) to change the dialing mode
to TONE mode. And then enter the rest digits will be
dialed as TONE signal. The LCD will display Fig. 66
Note: When you release the line, the dial mode will change to
the pulse mode again automatically.
27. DO NOT DISTURB FUNCTION
1. Press [FUNCTION] to display Fig. 57. And then press
[DND] (same as [4]) to activate DND. The LCD will
display Fig. 67a
2. To cancel the DND mode, press [FUNCTION] and then
press [DND] (same as [4]) again to disable DND mode.
The handset will be return to idle mode (Fig. 67b)
28. MUTE FUNCTION
The Mute feature turns off the microphone so the person at
the other phone cannot hear you. The Mute feature
automatically cancels when you hang up or change lines.
1. On line, press [MUTE] key for privacy, the LCD will
display Fig .68
2. To resume your conversation, press the [MUTE] key
again and will display Fig. 69.
LINE 2 mm:ss
035775141*2581
%2
Fig.66
HANDSET 11
DO NOT DISTURB
Fig.67a
HANDSET 11
Fig.67b
MUTE! mm:ss
03577971*96
%2
Fig.68