User Manual

VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION
DOCUMENT NO.
VT40-2421 MMI REV NO.
4
PAGE
22 of 43
MAKE AN INTERCOM CALL
1. Standby, press the [ICM] key. The LCD will display Fig.
42
2. Dial desired intercom number, say station 12 calls station
05, the LCD will display Fig. 43
3. If the Called Party is Idle and Access-able, the calling
party station 12 will display Fig. 44 and the called party
station 05 will get an intercom ring and display Fig.45
4. If the called party is busy and access-able, the calling
party station 12 will display Fig.46
5. If the Called Party is in DND (Ringer Off) Mode and
Access-able, the calling party station 12 will display
Fig.47.
6.
If the called party is an illegal number, the calling party
station will display Fig.48.
Note:
-Access-able means the called party is linked with the base
unit.
When the called party is busy or in DND, the called party
station 05 will remain UN-changed. The called party will not
hear a call waiting triple beep for intercom call.
- Illegal means the called party is non-existing or loses the
link with this system.
INTERCOM TO
Fig.42
INTERCOM TO 05
Fig.43
INTERCOM TO 05
RINGING!
Fig.44
INTERCOM BY 12
RINGING!
Fig.45
INTERCOM TO 05
BUSY!
Fig.46
INTERCOM TO 05
DO NOT DISTURB!
Fig.47
INTERCOM TO 05
NOT FOUND!
Fig.48