User Manual

VTECH TELECOMMUNICATIONS LTD.

File :VT40-2421

MMI REV 4.doc

Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION

DOCUMENT NO.

VT40-2421 MMI REV NO.

PAGE

21 of 43

17. HOLD

1. On line (eg. Line 2), the screen will display either Fig. 33

or Fig.35

2. Press [HOLD], and the LCD will display Fig.40 and

Handset icons will be flashing.

3. After 10 seconds time out, the display will return to idle

display as Fig. 1a with flashing Handset icons

4. If the Hold Reminder Time is not disabled, when you

held a CO line over a programmed period of time, a triple

beep will be heard to remind you that the line is still held.

(The hold reminder time can be set from 15/30/45/60

seconds and off. The default is 30 seconds)

5. If the held CO line is not picked up for 3 minutes, all

handset units will start ringing (i.e., Recall Ring) to

remind all of users. The related icons will be changed.

6. Press [any one of the digit] key or you may press the

ringing [Lx] to pick up the CO hold recall ringing line,

the LCD will display Fig.33

Note: In this wireless system, the held CO line will be

released when the held line isn’t picked up within 5 minutes.

TRANSFER TO/HOLD

Fig.40