User Manual

VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION
DOCUMENT NO.
VT40-2421 MMI REV NO.
4
PAGE
15 of 43
3. PROGRAMMING HANDSET ID
1. Press [MEM] to enter the programming mode (refer to
Fig. 3)
2. Press [ss ] / [tt ] until displaying “HANDSET ID”(refer
to Fig. 9)
3. Press [#] to confirm this option (refer Fig. 9)
4. Enter 2 digit ID no. (01-12) (refer to Fig.10). For
example, handset ID is 05
5. Press [#] to confirm the ID no. and the screen will display
Fig. 11 for 3 seconds and return to programming display
as Fig. 9 (The ID will be changed to 05)
4. SETTING RINGER VOLUME & ON/OFF
1. Press [MEM] to enter the programming mode (refer to
Fig 3)
2. Press [ss ] / [tt ] until displaying “CO LINE x RING”
where x=1-4 of your chosen line for setting ringer on/off.
(refer to Fig. 12)
3. Press [#] to confirm this option
4. Press [ss ] / [tt ] to choose ON or Off
5. Press [#] to confirm the choice to display either Fig.13 or
Fig.14 and the screen will display Fig. 11 for 3 seconds
and return to programming display as Fig 12.
5. PROGRAMMING RINGER TYPE (4
TYPES)
1. Press [MEM] to enter the programming mode (refer to
Fig 3)
2. Press [ss ] / [tt ] until displaying “RINGER TYPE” (refer
to Fig. 15 )
Fig.9
HANDSET ID
01 [ss ] /[ tt ]
Fig.10
PLS ENTER ID NO.
05
Fig.11
PROGRAMMING
SUCCESSFUL!
Fig.12
CO LINE 1 RING
ON [ss ] /[ tt ]
Fig.13
CO LINE 1 RING
ON [
ss
] /[
tt
]
Fig.14
CO LINE 1 RING
OFF [
ss ] /[ tt ]
Fig.15
RINGER TYPE
3 [ss ] /[ tt ]