User Manual

VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION
DOCUMENT NO.
VT40-2421 MMI REV NO.
4
PAGE
14 of 43
2. INSTALLATION
After charging, the handset is removed it from its charging
cradle, the screen will as Fig. 2.
Registering handset security codes
1. Press [MEM] and the LCD will display the first
programming choice as Fig.3
2. Press [
ss
] / [
tt
] until displaying “HS SECUIRTY
CODE”(refer to Fig 4. Show “XXXXXX” or “EMPTY”)
3. Press [#] to confirm this option
4. Enter 6 digits for the security code (see Fig. 5,
eg.123456).
5. Press [#] to confirm the code and the handset will display
Fig. 7 for 3 seconds if the registration is successful and
return to programming mode (refer to Fig. 4).
Registering base security codes
1. Power up the base unit and be sure the handset security
code has been programmed to in the handset
2. Press [MEM] t o enter the programming mode (refer to
Fig 3)
3. Press [ss ] / [tt ] until displaying “BU SECUIRTY
CODE”(refer to Fig 6)
4. Press [#] and HOLD the [#] key until a confirmation beep
is heard to indicate the security code is accepted correctly
in the base unit.
5. The handset will display Fig. 7 for 3 seconds if the
registration is successful and return to programming
mode (refer to Fig. 6).
6. After about 15 seconds, if you still do not get the
confirmation, then it means that the programming failed.
The error message is displayed as Fig 8 for 3 seconds and
return to Fig.6 display. In this case, the user has to re-do
from step 1 again.
Note:
If the programming is successful, a happy tone (one beep)
will be emitted.
If the programming is unsuccessful, an error tone(two beeps)
will be emitted.
Fig.2
HANDSET 01
NO SERVICE
Fig.3
MEMORY
[
ss
] /[
tt
]
Fig.6
BU SECURITY CODE
[
ss ] /[ tt ]
Fig.4
HS SECURITY CODE
XXXXXX [ss ] /[ tt ]
Fig.5
PLS ENTER CODE
123456
Fig.7
PROGRAMMING
SUCCESSFUL!
Fig.8
ERROR! PLS
REGISTER AGAIN!