Engineered To Perform 5Kg FRONT LOAD CLOTHES WASHER USER’S MANUAL Model : TWM50FA To ensure proper use and your safety, please read the following user manual completely before operating this appliance. Please keep this manual in a safe place for future reference.
Thank you for purchasing our product and thank you for placing your confidence in us. Read this manual carefully before use. Follow instructions and keep the manual for future reference. Follow the operating instructions and safety notices in this manual. If any trouble arise, do not fix it yourself or hand it to the after sales service centre which have not been authorised. Please contact TECO service on 1300 660 037 (9am ~ 4pm AEST Mon - Fri).
TABLE OF CONTENTS Safety Precautions ................ 1 Table Of Contents ................ 2 Identifying Washer Parts ................ 3 Quick Start Guide ................ 4 Installation ................ 5 - 6 Pre Wash Checklist ................ 7 - 8 Control Panel ................ 9 Wash Programs & Functions ................ 10 Loading Detergent ................ 10 Wash Program Information ................ 11 Cleaning & Maintenance ................ 12 Troubleshooting ...............
IDENTIFYING WASHER PARTS Detergent Dispenser Control Panel Power Button START/PAUSE Button Program Selection Dial Drum Cabinet Door Service Panel Adjustable Feet (x4) Detergent Dispenser Cold Water Inlet Hose x1 Drain Hose Support x1 3 Shipping Bolt Caps x4
QUICK START GUIDE 1. Install the clothes washer 9. Press the START/PAUSE button 2. Load the laundry 8. Select a wash program 3. Add washing detergent 7. Connect the power plug Press the power button 6. Turn on the water tap 4. Close the door 5. Attach/check the drain pipe Wash Program Selection 1. Press the POWER button 2. Select a program 3. Select a water level or other functions 4.
INSTALLATION Unpacking Instructions 1. Remove the clothes washer from the carton. NOTE: Please dispose of packaging and plastic bags responsibly. 2. Open the washer door and remove the accessories from inside the washer. 3. Remove the four shipping bolts from the rear of the washer prior to use. 4. Plug the shipping bolt holes with the supplied caps. Install supplied caps to cover holes from shipping bolts. Choosing a location The clothes washer should be located on a firm and flat surface.
Installing the Drain Hose When placing the drain hose, ensure it is above 600mm and below 1000mm. Otherwise, the washer may not drain correctly and an error will occur. Ensure the drain hose is placed in a drain with a diameter of at least 30mm to meet minimum drainage flow requirements. Secure the drain hose in place to avoid leaking and spilling as the water drains. Do not immerse the drain hose in water. Secure in place here Bin d Min.600mm Max.1000mm Sink / Basin Max.
PRE WASH CHECKLIST Before starting each wash, please check the following: Level the clothes washer by adjusting the feet. Adjustable feet Install the water inlet hose Connect to a power source Adjust the feet by turning clockwise to extend or anti clockwise to shorten. Slightly tilt the clothes washer back to access the adjustable feet. Ensure all four corners are flat and level to the surface it is placed on. Ensure the clothes washer is level and stable prior to starting each wash.
PRE WASH CHECKLIST Open the mains water supply Ensure the water mains are in the open position and a steady water supply is available to the clothes washer. Position the drain hose M a x i m u m 1 0 00mm Ensure the drain hose is correctly mounted between 600 and 1000mm above the ground. The drain water may overflow if the drain hose is below 600mm or decrease flow if placed above 1000mm.
CONTROL PANEL 5.0 1200 800 400 No Spin Program Dial Turn this dial to select a wash program. Choose between Cotton, Synthetic, Wool, Underwear, Cotton Intensive, Spin and Drum Clean. Power Button Press this button to switch the washer on and off. Press once to switch on. When finished a wash program, press to switch off. Spin Speed Button Press this button to select the spin speed. Change the spin speed by pressing this button repeatedly. Choose between No Spin, 400, 800 and 1200 RPM. Temp.
WASH PROGRAM & FUNCTIONS NOTE: The clothes washer will not start a wash cycle if the selected water level can not be reached. Please refer to Page 14 for troubleshooting instructions. Cotton You can select this program with any water temperature (20oC, 40oC, 60oC, 90oC and cold). Quick You can select this program with the following water temperature setting: 20oC, 40oC and cold. Synthetic You can select this program with the following water temperature setting: 20oC, 40oC, 60oC and cold.
WASH PROGRAM INFORMATION Load(kg) 1.5 Detergent Drawer Compartment 9 40 Cold Default Wash Temp. (oC) 140 15 Total Wash Time (min) 1200 1200 1200 Default Speed (RPM) 1200 15 130 800 NA 60 105 400 400 40 85 1200 90 40 108 90 40 11 PROGRAM Cotton Intensive 0 1.5 LEGEND: Dertergent is required Detergent is optional Detergent is NOT required PLEASE NOTE: The table above is intended as a reference guide only. Individual results may vary.
CLEANING & MAINTENANCE Always disconnect the clothes washer from the mains power and water source before performing any maintenance or cleaning of the appliance. CAUTION For optimal performance, regular maintenance and cleaning is highly recommended. Regular maintenance and cleaning will extend the service life of the clothes washer. Cleaning the outer surface (cabinet) To clean the cabinet and control panel, use a damp cloth and wipe dry.
Please check the points below after maintenance: Is there any damage to the power lead? Can the power plug be inserted into the socket correctly? Is the power plug and/or lead heating up? Do the filters need cleaning? TROUBLESHOOTING If the clothes washer does not perform as expected, malfunctions or an alarm is sounding, please check the following list of possible solutions. If a solution can not be found or the problem persists, please contact TECO service (refer to Page 16).
TROUBLESHOOTING The following table is a list of the fault indicators and corresponding alarms. Status of Corresponding Indicators Temp Temp Temp Temp 90oC 60oC 40oC 20oC Description Door lock Water filling issue. Filling time exceeds 7 minutes Cause Possible Solution Door is not closed properly. Restart after the door is closed Please call TECO service if problem persists. Tap is not open or water flows too slow. Inlet valve filter is blocked. Inlet pipe is twisted.
REPAIRS, SERVICE & WARRANTY It is hazardous for anyone installing, removing, altering, repairing, servicing, or testing. Only an Authorised Service Person can carry out servicing or repairs to this appliance. IF SERVICE IS REQUIRED If you have a problem, and the problem persists after you have made the checks mentioned above, contact: TECO Australia’s Service on 1300 660 037 (9am to 4pm AEST Mon to Fri) For warranty details please visit www.teco.com.
SPECIFICATIONS Model TWM50FA Rated Motor Input Power 2100W Classification of use Indoor use only Rated Total Gross Volume (L) 5Kg Voltage (V) 230 Frequency (Hz) 50 Washing Type Drum Water Pressure 0.05MPa - 1MPa Max. Spin Speed 1200 RPM Dimensions (mm) Height 850 Width 595 Depth 470 Net Weight (Kg) 50Kg IP rating IPX4 NOTE: This product is subject to continuous improvement, specifications are subject to change without prior notice.
www.teco.com.
