Operation Manual

TRANSPORTING THE APPLIANCE &

INSTALLATION

1.The appliance must be transported only in a vertical position. The

packing must be intact during the transportation.

2. When unpacking and re-packing the appliance, please memorise the

position of each accessory of the appliance when unpacking it. When

re-packing the appliance for transportation, ensure all accessories are

secured before transportation.

3. Do not lift or pull the door during transportation.

4. When moving the appliance, do not tilt >45 degrees

(the angle of the vertical direction). Please avoid strong

vibration and impacts that could cause damage to the appliance.

5. The refrigerator should be located on a ﬁ rm and ﬂ at surface. An uneven

surface may cause excess operating noise or vibration.

(a) The noise may be increased if the ﬂ oor is not ﬁ rm.

(b) If the appliance is to be positioned on carpet ﬂ ooring and heat

emitted from the appliance is a concern, place a solid sheet

under the appliance.

6. Choose a location which is not exposed to sunlight, high temperature or

humid, as humidity may cause staining.

7. It is recommended a clearance of at least 300mm away

from objects and walls on both sides and top. Ensure the

clearance behind the appliance is not less than 100mm and

160

° clear for both doors to swing open.

8. If the appliance is unstable, rotating either of the front two legs in a

clockwise direction will raise the appliance.

9. When adjusting the front legs, ensure the

appliance slopes backwards slightly for keeping the

door closed.

10. Remove all internal packaging before operating.

300mm

100mm