Operation Manual

ENERGY SAVING TIPS
1. Adjust the temperature to a setting that is acceptable for the storage of
the food. This will reduce the power consumption.
2. Only open the door when required. Frequently opening either door will
increase power consumption.
3. To maintain good air circulation, keep the shelves and crisper of the
refrigerator as supplied.
MAINTENANCE
The appliance should be maintained and cleaned frequently. For your
safety, pull the power plug out of the socket before cleaning.
1.Interior and exterior maintenance
Clean the interior of the appliance with clean water and wipe it dry
with a piece of dry cloth.
Cleansers such as soap powder, abrasive cleaning powder, alkali
cleansers, chemical cloth, thinners, alcohol, acid petroleum products
and hot water should not be used to clean the refrigerator as they
may damage the painted cover and plastics.
2. Smearing can age the interior plastic components, so remove it as soon
as possible.
3. Wipe the door gasket clean, it is easy to damage the door gaskets if
polluted by stains, e.g. oil, sauce, etc.
4. The replacement of interior light
Remove the cover and replace the LED bulb with a direct current 12V
bulb.
a. Unplug the power and remove the cover by locating the cover
levers and squeeze them while lowering the cover downward.
b. Remove the existing LED bulb and replace with a new bulb.
c. Replace the cover and plug in the refrigerator.
5. Please check the points below after maintenance:
1) Is there any damage to the power lead?
2) Can the power plug be inserted into the power socket correctly?
3)Is the power plug and/or lead heating up?
9