User`s manual

UPS EXA LCD 1.5 – 2-0 – 2.6 11 User’s manual
8 Technical Characteristics
UPS EXA LCD Model 1.5 2.0 2.6
Power 1500 VA (1050 W) 2000 VA (1400 W) 2600 VA (1820 W)
Recommended for:
1 Personal Computer with
650W PSU (550W real power)
+ 1 LCD Monitor (80W)
+ 1 Printer (420W) (*)
2 Personal Computers with
550W PSU (450W real power)
+ 2 LCD Monitors (80W)
+ 2 Printers (170W) (*)
2 Personal Computers with
650W PSU (550W real power)
+ 2 LCD Monitors (80W)
+ 2 Printers (280W) (*)
Technology Line Interactive with Stabilizer
Nominal Input Voltage Single-phase 230 Vac
Input Voltage Range +20% / -25%
Input/Output Frequency 50/60 Hz (automatic selection)
Input Frequency Range +/- 5%
Nominal Output Voltage Single-phase 230 Vac
Output Voltage Regulation
(Normal mode)
Through AVR (Automatic Voltage Regulation)
Output Voltage Regulation
(Battery mode)
+/- 5%
Output Inverter Waveform Sinewave
Accepted Overload < 130%
Certifications
CE
Standards: CEI EN 62040-1: 2009 (Low Voltage Directive) –
CEI EN 62040-2: 2006 (EMC Directive)
Efficiency 92%
Battery Type Lead acid, sealed, free maintenance
Number of batteries 2
Nominal Battery Voltage 24 Vdc
Battery Specifications 12 Vdc – 7,2 Ah – 6 cells 12 Vdc – 9 Ah – 6 cells 12 Vdc – 11 Ah – 6 cells
Backup Time (typical) 10 min 8 min 8 min
Battery Charge Time (typical) 4 hours
Hot Swap Battery Included
Audible Noise (at 1 meter) < 45 dBA
Cooling Fan cooling
Environmental Operative Specification
Temperature: 0-40 °C - Humidity 0-95% (without condensation)
Altitude: max 3.000 mt
Computer Interface 1 RS232 port and 1 USB port
UPS Management Software
Software ViewPower,
downloadable free of charge from www.tecnoware.com
SNMP Interface Optional
Telephone and Modem protection RJ11/RJ45 plugs included
Output sockets 4 UPS Output sockets (IEC type) + 2 ONLY FILTERED Output sockets (IEC type)
Dimension (W x H x D) 14,5 x 20 x 38 cm
Net Weight 13,8 Kg 14,2 Kg 16 Kg
Technical data may change without prior notice
(*) Connect the printers to the ONLY FILTERED Output sockets