User`s manual
;-#<
UPS EVO DSP PLUS TT 2 User’s manual
)) B ',**C
EVO DSP PLUS TT models have the EPO (Emergency Power OFF) connector on the rear side, (see figure 6).
( $!,((44* !$!,,!* ',)
The UPS is supplied with EPO shortcircuited terminals and in this case the product works normally.
If you want to use an external switch to turn OFF the UPS by EPO, then remove the shortcircuit from the EPO
terminals and connect the switch to the EPO terminals as described in the figure 6.
EPO
1
2
REMOTE EPO
SWITCH
4'18B ',44C
#*(,(.(> !E*=(,!=(,(,
;((44 $!)
To switch the UPS Output ON again after an EPO, it is necessary to close again the EPO switch.
The EPO terminals are isolated and do not need an external feeding Voltage.
1 ,,!#!!
(,,!!!(!$A!*$)4!(!*
!$!$ B.# !$!$ #! # (C * ( #D ,,
!$*('(,*#D,!)
+, $$$,!.#D*()
4!*, $'%!,,!># !!$
.#!$!$(!$)(,,!>($
A!*$(!>!',,6*,B!>!',J C)
EVO DSP PLUS TT models are made of a single unit design that contains the electronic parts and batteries.
7*!'(!!,$=(!?
)(#,,!>(!!K44LB*'0C)
)(.#!'*((! 6$)
)(, 44B*'!(,.!44C)