User`s manual
;-#<
User’s manual 1 UPS EVO DSP PLUS TT
)) 7
Functions of the buttons are given below:
7 4,
; Turn ON: press and hold the button more than 0.5 sec to turn the UPS ON.
44 Turn OFF: press and hold the button more than 0.5 sec to turn the UPS OFF.
Battery Test: press and hold the button more than 0.5 sec to test the Battery while in Normal
mode.
"
Mute the alarm: press and hold the button more than 0.5 sec to mute the buzzer. If you press it
again after the buzzer is muted, the buzzer will beep again.
)) #$,!
There are 4 LEDs on the front panel to show the UPS working status:
! 7! 7! 4!
● ● ● ●
;/""$
○ ● ○ ○
7/F"$
○ ○ ● ○
7F"$
● ○ ○ ○
;&"$
○ ○ ○ ○
7/F"$
● ● ● ○
."$
● ● ○ ○
4/G;.F.;//"$
○ ● ○ ○
4!
○ ○ ○ ●
Note:
●
means LED is lit (ON) and
○
means LED is not lit (OFF).
))0 ,,!
, 799! 44
!
Bypass Mode Beeping once every 2 minutes
YES Battery Mode Beeping once every 4 seconds
Fault Mode Beeping continuously
+!'
Overload Beeping twice every second
NO
Others Beeping once every second
4!
All Beeping continuously YES
Note: 44IF means that the buzzer can be muted or stopped
44 = ; means that the buzzer can NOT be muted or stopped