Explosion diagram specification 1 3 5 7 9 11 13 15 17 19 21 Film three layers Uphousing Assembly PCBA Waterproof label ROHS Battery Easy Pull Glue PCB Graphite Film B Front Camera Coaxial Cable Vibration Motor SIM card holder T card holder 2 4 6 8 10 12 14 16 18 20 22 1 LCM Assembly Receiver FPC_SIDEKEY Adapter coupling FPC PCB Graphite Film A Back Camera Battery SUB PCBA Screw Fragile label Test Mylar
3 24 Conductive Foam 25 27 29 31 Front Camera Conductive Fabric Speaker Receiver Conductive Foam PS Rubber MIC rubber 26 28 30 32 33 Speaker Frame 34 35 37 Battery Cover Battery Cover Protector 36 38 Fingerprint Frame Fingerprint Module Battery Junctor Steel Speaker Adapter Coupling FPC Speaker Frame Conductive Fabric IMEI label Rear Camera Lens 2
1 Taking care of your device Your device is a product of superior design & craftsmanship and should be handled with care: The following recommendations will help protect your phone: Keep the device dry. Precipitation, humidity, and all types of liquid or moisture may contain minerals that can rust electronic circuits. Shut down the phone when it suffered water damage (Do not pull out the battery), and boot up the phone after it is dry.
Licking the charger is strictly prohibited; saliva is more corrosive than water. Residual saliva may short-circuit phone and damage its motherboard, causing the device to become inoperable; charger may also be damaged in the process. WARNING: Licking USB plug is strictly prohibited. Do not drop, knock, or shake device. Rough handling can disrupt internal circuit boards and fine mechanical parts. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
Battery & charger safety Do not place battery in fire, explosion may occur. With concern for the environment, please abide local laws & ordinances in battery disposal. Only use original battery, charger, and accessories applicable to the specific mobile model. Failure to do so voids the warranty and may result in a hazard. Power off mobile prior to testing its charger. If charger malfunctions, off-mode will prevent damage to the motherboard.
2 Know your phone 1. 3. 5. 7. 9. 11. 13. Earphone plug Receiver USB port Front camera Volume key Light/proximity sensor V irtual key 2. 4. 6. 8. 10. 12. 14.
15. SIM card slot 16. T-card slot 3 SIM / SD card installation 1. Power off mobile. 2. Refer to the following picture for SIM / SD card installation.
4 Home screen Home screen showcases frequently used apps, you can also display ubiquitous information such as time, weather (third-party app required), date, etc.
5 Dialing Tap the phone icon to open call interface. Enter contact number via keypad to start a call. The keypad interface also enables functions such as texting and contact storage.
6 Notification & function toggle The notification screen displays new information & events; simply tap the notification to access its detailed content. The function-toggle screen lists commonly used functions and their virtual switches. Tap a switch to quickly turn a function on/off.
7 Messages The message function sends plain or multimedia texts to your friends. Tap a message to view its content. Tap the “Compose new message” key to start composing a message and send it to designated contact.
8 Camera The camera function captures your surroundings via the front or rear camera. Various types of white balance and photo fi lters are available to accommodate different lighting conditions.
9 My picture My picture can be used to browse images and photos from mobile or SD card storage; editing functions can be performed. Images can be designated as wallpaper or contact avatar. The sharing function allows images to be shared with friends via Bluetooth and MMS, etc.
10 Wi-Fi Enabling W i-F i grants access to local hotspots and allows you to browse Internet. Private networks will require a password.
11 Factory data reset “Factory data reset” resets all configurations to their default state. Internal mobile storage is cleared of all data including apps, photos, music, videos, mail, contacts, etc. This procedure may take a long time. Please wait patiently for mobile to restart and do not power off. WARNING: Factory data reset as a last resort. Once activated all user data & configurations are deleted and cannot be restored.
12 FCC Caution Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Information to the user.
and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
1.100W/kg. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly.
