Instructions

Attention:
Only install the specified grinding pad on the machine. In order to ensure optimal performance, machine
should be run at slightly lower speed for several minutes to make the grinding pad fit the sealing surface
perfectly. During this process, the white foam particles will come out from the grinding head. However,
this won’t damage the machine.
Connect to Vacuum Cleaner
Inhalation of dust is hazardous to health! When carrying out the work which can produce dust, please always
wear a dust mask.
● Loose the fastening nut.
● Connect the hose to the exit of the handle
● The other end of the hose is connected to the vacuum cleaner;
Operate the Machine
- Do not control the machine’s head.
- Hold the machine with both hands.
- Before operating the machine, make sure every fastening handle is closed.
- Connect the machine to the main power supply.
- Before switching on the machine, keep the sanding head slightly away from the work surface.
- Start the machine for necessary sanding work.