Instructions

Service
Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
PRECAUTIONAL ON USING DRYWALL SANDER
Attention - You must abide by the following basic safety measures against electrical shocks, injuries and the
danger of fire when using electric tools. Read and abide by these instructions before you start to use any tools.
These instructions must be kept in a safe place.
 The equipment must never be used in surroundings where an explosive atmosphere exists.
 Do not let the cable touch any parts of your body.
 Only use the extension cable approved for use in the working area.
 Do not force the machine for unsuitable work, for example, rough grinding, brushing, etc. Otherwise,
dangers and harms will be caused.
 Only use identical replacement parts when servicing. Otherwise, risk-free operation can’t be guaranteed.
 The accessories’ allowed speed must be at least the same as the maximum speed of the machine. Or
else, they may be broken or cracked when their running speed is go over the machine’s allowed speed.
 Do not use damaged accessories. Before use, always check whether the accessories are nicked or
cracked.
For example, to grinding pad, please check the support plate is not cracked. Ensure everybody to be out
of the machine’s rotation area and run the machine at max. speed for one minute, which can fully test
the accessories.
 Do not put down the machine when it isn’t stopped completely. Otherwise, you will loss control to the
machine.
 Cleaning the exhaust port on your machine in regular.
When working, control the machine firmly with both hands to ensure safe operation.
 When sanding, do not use too big sandpaper. When choosing grinding disc, please observe the
manufacturer's specifications. The sand paper beyond the grinding block leads to risk of cutting and
injury and cause stuck as well.
 The machine can be connect to one extension tubes at most.
 We recommend that you always wear industrial safety gloves and safety goggles when working with the
drywall sander.
 Wearing close-fitting clothes is mandatory.
 Always allow for reaction torque
 Wear protection mask P2 to protect you from hazardous dusts and choose suitable vacuum cleaner.
HOW TO USE DRYWALL SANDER
Before setting up, repair or maintenance of the appliance you must always turn off the
Operating switch and pull out the mains plug!
Before Initial Operation
 Check if the rated frequency of the mains supply corresponds to the details of the type place.
 Before using the tool, read the instruction book carefully.