Instructions

EN
PRODUCT DESCRIPTION
The machine is designed for grinding drywalls, ceilings and walls of the inner and outer surfaces,
clearing the floor residues, paint coatings, adhesive and loose plaster etc.
You must abide by certain safety precautions when using the equipment. In order to
prevent injuries and damages from occurring, you must always read through this operating manual
carefully.
This manual must be kept in a safe place so that the information that it contains is always available. This
operating manual must accompany the equipment if it is transferred to somebody else.
We do not accept any liability for accidents or damage arising from ignoring this manual and the safety
instructions.
SAFETY INSTRUCTIONS
Read through these operating instructions carefully before using the appliance. Become familiar with the
functions and method of operation. To ensure proper operation, always maintain the appliance according
to the instructions. The operating instructions and associated documents should always be kept close to
the appliance.
When using power tools, you must observe the following basic safety precautions in order to ensure
Protection from electric shocks, injury and fire. Read and follow all the instructions before using this
power tool. Look after the notes on safety.
Always check if your mains voltage corresponds with the value on the type plate
USE CORRECT SUPPLY VOLTAGE: The power supply voltage must match the information quoted
on the tools identification plate.
USE PROPER EXTENSION CORD: Only use an approved extension cable that is suitable for the
machine's power. The cord must have a diameter of at least 1.5mm². When the extension cable is on a reel,
unroll the cable in its entirety.
SWITCH OFF THE MACHINE IMMEDIATELY IN CASE OF:
1. Malfunction in the mains plug, power cable or damaging of cable.
2. Broken switch.
3. Smoke or stench of scorched insulation.