User's Manual

User Manual
2
3
4 5
Please read this manual before operating the product. The manual should be kept for future reference.
Notice:
1. Any changes or modifications not approved by the competent authority may make the user unable
to operate this product.
2. In order to comply with the radiation limit, shielded signal cables and AC power cables must be used.
3. The manufacturer is not responsible for any radio or electrical interference caused by unapproved
modifications, and it is the user's responsibility to correct such interference.
Warning:
In order to prevent fire or explosion, do not expose the product to rain or moisture. There is a
dangerous high voltage inside the product. Please be careful when using and installing it. If you need
maintenance, you should seek professional personnel.
Precaution
1. Do not keep the product near water sources such as bathrooms, dishwashers, kitchens, washing
machines, swimming pools or wet basements.
2. Do not place the product on unstable cars, chairs, and tables.
3. Do not cover the ventilation holes on the product.
4. Please make sure to use a three-hole grounded socket
5. When the product is not used for a long time, please cut off the power supply.
6. Do not overload the socket, otherwise it will cause fire or electric shock.
7. Do not put foreign objects into the machine, it can cause short circuit and cause fire or electric shock.
8. Do not open the casing to avoid high voltage or other dangers. If there is any fault, please contact the
after-sales service personnel directly.
9. To ensure safe work, please ensure that the power input voltage is consistent with the nameplate.
Common Problems and Solutions
Q1: What should I do if it doesn't boot up?
A1: 1. Check if the power supply is powered on.
2. Please tell
Amazon to contact us directly to figure out the problems for you.
Q2: How do I install or update drivers?
A2: 1. Right-Click "This PC" and Select "Manage"
2. Then click "Device Manager" in the left menu list
3. Find the drivers you want to update
Q3: What if it cannot connect to the W
iFi?
A3: 1. Turn on the wifi hotspot of your mobile phone and see if you can connect to it.
2. Please use your mobile phone to connect to the router wifi to test whether the
router works normally
.
3. If there is no problem with the above, please insert the wired network cable to
check whether the machine can access the Internet normally
1
C
Ports of Product
Front Ports
Back Ports
D
Care During Use
B
How to Use
What’s in the Box
A
Size（In)
● Power cords vary by country
●
Some models may contain some accessories not listed
User Manual*1 Power Cords & Adapters*1
微型计算机说明书
Right ViewFront ViewLeft View
Can be placed flat or upright
1
Insert the DC power plug on the adapter into the power input jack (DC).
2
Connect the AC adapter plug to the AC/DC adapter.
3
Plug the AC adapter into a power outlet.
4
Press the power button on the Mini PC.
MINI PC
7.49
7.348.02
2.36
0.69
3
2
1
4
Power Button
USB2.0
USB2.0
Mic
Line out
1
2
3
4
5
FCC Warning
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any inte
rference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interferenceto
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the
radiator and your body.