Trouble Shooting Guide
19
BSM-1
BSM-2
BSM-1
BSM-2
3. For environment with continuous vibration from the floor, the sensor
mat may has false detection and delay or prevent the alarm from
sounding. Under such circumstance, move the crib to the corner of
the room or near a solid supporting wall. Moreover, keep the crib
away from strong draft and air current.
4. Besure the camera and sensor mat is within the same room or apart
from each other not more than a distance of 10m, otherwise they may
lost connection with each other and breathing movement of baby
cannot be monitored.
5. When baby needs to be taken out from crib for feeding or other
purpose, to avoid false alarm on PU,short press the alarm hold
buttom 21 . This button can be pressed before or after taking out the
baby, but such action must be preformed within 20 sec, or otherwise
the alarm would still sound. To stop alarm in PU, short press alarm
hold button 21 again. Upon placing back the baby into crib, the
sensor mat will automatically resume to monitor the movemnent of
baby after 20 sec.
6. When the baby’s movement increases as he grows older, he may
move away from the sensor mat and cause false alarm. Additional
movement sensor mat can be connected to increase the coverage.
or