Trouble Shooting Guide

18
1.Place the movement sensor mat underneath the mattress,
lengthwise direction and directly under where your baby sleeps. For
optimum performance, there should be no bedclothes tucked
between the sensor mat and the mattress. Besides, if the mattress
support is too soft (such as box spring or underpadding), a hard
board is required to be placed underneath the mat to provide a firm
surface for it. The size of the board should be larger than the sensor
mat.
2. With the baby placed in crib, switch on sensor mat by turning the
movement sensitivity knob 20 in clockwise direction. Adjust the
position of knob 20 such that the movement indicator 19 will blink
in pace with the breathing movement of baby.
Slip the control box underneath the mattress to keep out of reach of
baby and place it as far away from the sensor mat as possible.
According to the change in weight as baby grows, it may be
necessary to adjust the sensitivity setting of knob 20 again. In case
the sensitivity setting is not appropriate, the movement indicator 19
will always stay ON or OFF and false alarm may occur.
N.B. Before attempting to adjust the knob 20 , wait for at least
15 -20 min until the baby has settled down or fallen asleep.
Movement Sensor Mat
Mattress
13. In case the temperature alarm is set to ON, whenever the baby’s room
temperature falls outside the range as prescribed by the high and low
temperature limits set in the app, an alarm will be heard and
temperature reading starts flashing on icon screen.
14. It is possible for parent to talk back to baby to soothe his emotion. Press
and hold the button 11, O show up on icon screen. Speak
towards the microphone 13 . Release button 11 after finish
speaking. It is worth noted that the parent can talk back anytime they
prefer, but it would not be able to hear the baby’s voice during talk back.
15. The various alarm is designed to have following priority :
Out of range alarm > Breathing alert > Temperature alarm > Battery low
alarm
Only one kind of alarm can be heard at any time to avoid confusion. An
alarm can be muted by short press of anyone of button 10
11 12 15 but NOT button 14. However, the alarm icon will keep
showing on icon screen until the condition is rectified.
16. Each time any of the button 10 12 14 15 is pressed, a beep
tone will be heard to validate your entry.