Trouble Shooting Guide

15
5. Place the PU at a reasonable distance away from camera to avoid
feedback. Too close a distance will create a screeching sound at the
speaker 18 .
6. Once the PU receives a signal, the icon screen will light up and
depending the signal is coming from which camera, the corresponding
camera no. will show up together with other information (room
temperature, WiFi mode or ultra safe mode, etc.) of that camera.
N.B. In case the PU is paired to only one camera, the icon screen
will not show the camera no.
7. The speaker 18 volume can be adjusted using the buttons 12 15.The
temperature reading also change correspondingly during adjustment to
show the level ( 1 to 5) being selected. When the level is set to minimum
and the M show up on icon screen, the speaker 18 is totally muted.
Under such circumstances, parent can still monitor the activity of baby by
looking at the sound level meter.
N.B. When the camera is under pan / tilt movement, the speaker
volume will be automatically turned down to minimize the humming
noise created by electric motor.