Trouble Shooting Guide

12
Parent unit
1. Rotate the side ring 16 clockwise or anti-clockwise to switch on the unit
(Clockwise – unit on with vibration/Anti-clockwise – unit on only).
2. The icon screen will show up for around 20 sec and if there is no sound
from baby, the icons (except the power indicator icon ) will go off to
save battery power.
3. Normally, the power indicator icon A will show green and when battery
becomes low, it will start flashing green. Once the unit is under charge,
this indicator will show red.
4. To enter setting mode, long press the button 10 for 2 sec. The icon
screen will show either following :
(a) When the PU is paired to two cameras
Use the buttons 12 15 to select between the camera to be set,
press button 10 to confirm.
(b) When the PU is paired to only one camera
Lullaby playing
Use the buttons 12 15 to select between ON/OFF, press button
10 to confirm. Once ON is selected, the song number will show flashing
on icon screen, use buttons 12 15 to select the preferred music,
press button 10 to confirm.
or
steady
ashing