User's Manual Part 2

82
1. Filter Mode: Select Permit Only.
2. Access Policy: Select an access policy number, say, 1, from the
drop-down list.
3. Policy Name: Briefly describe the current rule, say, 80.
4. Start IP/End IP: Enter the same IP address, say, 110, or 2
different IP addresses, say, 110 and 120 in both boxes to specify
a single PC or a range of PCs for the current rule to apply to.
5. Port: Specify TCP/UDP protocol port number (s), say, 80.
6. Type (or Protocol): Select Both.
7. Time: Specify a time period for a current rule to take effect. If
the field is set to 0:00-0:00, the rule will be applied 24hrs/day.