User's Manual Part 1

3. If "Connecting" is displayed and no WAN IP address is seen, try

refreshing the page five times. And if it still displays

"Connecting" try steps below:

1) Contact your ISP for assistance if you are using the DHCP

connection type.

2) Read the connection diagnostic info on WAN status.

Note:

Below diagnostic info will be displayed on particular occasions for

your reference:

1) You have connected to Internet successfully.

2) You might have entered a wrong user name and/or a wrong

password. Please contact your ISP for the correct user name and

password and enter them again.

3) Ethernet cable is not connected or not properly connected to the