User's Manual

User Guide
-28-
2) Select Registrar as the config mode and enter the router’s PIN code that displays on the router’s
WPS screen, in the PIN code field here.
Now you can view the SSID, authenticaiton type,and encrytion type that need to be negotiated by the
WPS in registrar mode.These values can be modified but we recommend using the default. Here we
use the defaut setting and then click the next buton.
You can view the negotiation key on the screen below ,but you are not recommended to modify it,just
click the next buton.
Then click Start PIN on the screen below to perform WPS connection.