User's Manual

User Guide
-14-
Note:
If the SSID broadcast function of the wireless router or AP you wish to connect is disabled, then the
wireless adapter can not scan the SSID, thus you need to connect by creating the corresponding
profile.
2.Ad-Hoc Profile management
Using the Ad-hoc mode to establish a wireless network requires that each computer should be
equipped with a wireless network adapter. By connecting these wireless adapters, computers are able
to share the resources. The detailed setting steps are as follows:
1） You must alllocate a static IP for each wireless adapter to be connected in Ad-hoc mode.
a. Right click Network on your computer’s desktop and select Properties.
b. Click Change adapter settings, right click Wireless Network Connection, and select Properties.