User's Manual

User Guide
-9-
Before you connect to a wireless network, please click the Rescan button to update the wireless
network list and select the one you want to connect to, then click the Connect button .
For the networks that are not encrypted, you can directly click the Connect button
. However, for the
encrypted wireless networks,a Profile Settings dialog will pop up and you must select the
corresponding authentication and encryption type, and then click the Next button to input the correct
key. Please note that this type of connection will not create a profile, therefore the next time you connect
to this network you will still need to select it manually.
The detailed explanations regarding authentication and encryption types are as follows:
WEP：Supports 10/26-bit Hex characters and 5/13-bit ASCII.
WPA-PSK：Supports 8-63-bit ASCII and 8-64-bit Hex characters.
WPA2-PSK：Supports 8-63-bit ASCII and 8-64-bit Hex characters.
WPA-PSK/WPA2-PSK：Supports 8-63-bit ASCII and 8-64 -bit hex characters.
Note:
The Hex characters consist of numbers 0~9 and letters a-f.
ASCII characters consist of any Arabic digitals/letters and characters.