Datasheet
Techclean Absorbwipe
Product# 2351-2352
Product Description
Very soft and absorbent hydro entangled polyester wipe for cleaning
optical equipment, fiber optics, and other sensitive surfaces.
Features / Benefits
• Class 100 cleanroom qualified
• Non-abrasive
• Extremely soft
• Highly absorbent
Packaging and Availability
Basis Weight (oz/yd
2
) 1.6
Average Thickness (mils) 9.9
Dry Tensile Strength: (lb/in)
MD 4.7
CD 0.9
Wet Tensile Strength: (lb/in)
MD 2.8
CD 0.8
Absorbent Capacity: (%) 900
(Per IES-RP-CC004.2, Section 7.1)
Extractable Ions in Deionized Water (ppm)
Chloride 2.08
Sodium <11
Potassium <22
Magnesium <11
Calcium 18
Aluminum <6
(Per IES-RP-CC004.2, Section 6.2)
Non-Volatile Residue (g/sq-m)
Deionized Water 0.013
Isopropyl Alcohol 0.055
1,1,1 trichloroethane 0.085
(Per IES-RP-CC004.2, Section 6.1.1)
Packaging and Availability
2351-100 100 count, flat 4”x4”, (10.2cm x 10.2cm) double-bagged
12 bags/ case
2352-100 100 count, flat 9”x9”, (23cm x 23cm) double-bagged
12 bags/ case
Environmental Policy
Techspray® is committed to developing products to ensure a safer and
cleaner environment. We will continue to meet and sustain the
regulations of all federal, state and local government agencies.
Resources
Techspray® products are supported by global sales, technical and
customer services resources.
For additional technical information on this product or other
Techspray® products in the United States, call the technical sales
department at 800-858-4043, email tsales@techspray.com or visit our
web site at: www.techspray.com.
Important Notice to Purchaser/User: The information in this publication
is based on tests that we believe are reliable. The results may vary due
to differences in tests type and conditions. We recommend that each
user evaluate the product to determine its suitability for the intended
application. Conditions of use are outside our control and vary widely.
Techspray’s only obligation and your only solution is replacement of
product that is shown to be defective when you receive it. In no case
will Techspray® be liable for any special, incidental, or consequential
damages based on breach of warranty, negligence or any other theory.
Rev. A (08/18) Page 1 of 1
North America
Techspray®
8125 Cobb Center Drive
Kennesaw, GA 30152
800-858-4043
tsales@techspray.com
Europe
ITW Contamination Control BV
Saffierlaan 5, 2132 VZ Hoofddorp
The Netherlands
+31 88 1307 400
info@itw-cc.com
Countries outside the US
Call to locate a distributor in your
country