Datasheet
Performance
Tested according to modified MIL-PRF-29608 4.59 standards:
Paste dried for 5 minutes at 212°F (100°C).
Paste is applied to cleaning coupons, sprayed with cleaning fluid, allowed to sit 10-seconds, then a poly-cellulose
wipe (saturated with same cleaning fluid) is dragged across one time using a dowel to maintain consistent pressure.
Percentage refers to the amount of soil (by weight) removed from stainless steel test coupon.
Kester FL250D
Lead, No-Clean
Kester HM531
Lead, Water-sol
Kester EM907
Lead-Free, No-Clean
Techspray Renew Eco-Stencil Cleaner 1570
53% 89% 34%
99.8% IPA 52% 53% 40%
Techspray Water-Based SMT Cleaner 1692 26%
not tested not tested
Compatibility
Metals
Test method: 30 day submersion in sealed container.
Material
Compatibility
Brassfoil
Excellent
Copperfoil
Excellent
Nickel200
Excellent
Aluminum6061
Excellent
Aluminum2024
Excellent
Anodizedaluminum
Good (1)
StainlessSteel316
Excellent
StainlessSteel304
Excellent
Mildcarbonsteel
Not recommended (2)
GalvanizedSteel
Excellent
1 = Some paint traces removed.
2 = Heavy tarnish, rust, 0.02% material gain from oxidation and mineralization
Note: Eco-Stencil™ is a water-based formula, so will encourage oxidation with prolonged exposure to iron, steel, and
other susceptible metals.
Environmental Policy
Techspray
®
is committed to developing products to ensure a safer and cleaner environment. We
will continue to meet and sustain the regulations of all federal, state and local government
agencies.
3 Copyright 2009 Techspray.
For Commercial Use Only