Datasheet

About TECHSPRAY RENEW

TECHSPRAY RENEW

is a brand that represents High Performance Eco-Cleaning

Techspray

has applied our expertise in solvent cleaning to formulate some of the most effective

eco-friendly cleaners on the market. Performance is our top priority, using the best “green”

solutions as they become available. We all are at the cusp of the ongoing movement toward

sustainable products, packaging, and processes. It is Techspray’s intention to stay at the cutting-

edge while keeping our products powerful and cost effective.

Directions

Manual Stencil Cleaning

• Spray and saturate area to be cleaned.

• Wipe gently at first to allow cleaning agent to break down paste or adhesive.

• Continue to wipe in a circular motion until remaining residues are fully removed.

• Replace wipe as it becomes overly saturated with the paste/adhesive or tattered.

• Dispose of soiled wipe appropriately depending on the type of paste/adhesive removed.

Underside Stencil Cleaning

• Fill cleaner into designated reservoir of SMT printer.

• Keep adequate liquid level.

Chemical Components

Component CAS#

2-propanol-1-butoxy ........................................................................................ 5131-66-8

Alcohols, C6-C12, ethoxylated propoxylated ................................................... 68937-66-6

Includes other hazardous components in non-reportable quantities.

Chemical Properties (MSDS available on request)

• EXPOSURE LIMIT: Limits on components not established.

Manufacturer’s recommendation 1000 ppm.

• PHYSICAL STATE: Liquid

• ODOR: Faint ethereal odor

• APPEARANCE: Clear, mobile liquid

• pH: 5-6

• PERCENT VOLATILE: 97% at 104°C

• VAPOR PRESSURE: < 0.01 mmHg@20°C (VOC Composite Vapor Pressure)

• BOILING POINT : ~212°F (100°C)

• FLASHPOINT AND METHOD (TAG Closed Cup): None to boiling point

205°F (96°C)

Note: does not sustain combustion.

• SOLUBILITY IN WATER: Fully miscible

• DENSITY: 0.99 at 25°C

• VOC (by wt): 2.7%, 26.5 g/l

For Commercial Use Only