Operation Manual

BROADBAND INTERNET ROUTER – USER’S MANUAL
- Page 10 of 13 -
5. Routing
If your Cable/DSL Router is connected to more than one network, you may have to
set up a static route between the two networks. A static route is a predetermined
pathway that network data packets must travel to reach a specific host or network.
Click ‘Static Routing table’ can set routing function
6. LAN filter
This feature allows you to block/enable some LAN Computers access to the Internet.
You can set up filters by using IP addresses, network port numbers, day of the week or
time of the day.