Operation Manual

Help File PDF SnagIt 9.0
50  www.techsmith.com
The following graphic shows an example of a Custom trim:
Setup Instructions
1. In SnagIt, select Image capture mode.
2. Select the Input and Output.
3. Select Effects down arrow > Trim.
4. Select Automatic or customize the Effect using the available settings. Click OK.
5. Click the Capture button or press the capture hotkey. The capture is sent to the selected Output.
To disable a Trim effect, select Effects down arrow > Trim. Click the None option. Click OK.
For additional effects, see Add an Effect during Image Capture.