Extra Information

Snagit on Windows Snagit 11.1 Help File
www.techsmith.com - 51 -
Swap Colors Effect
The Color Substitution Effect swaps two colors with each other during the capture process.
You must select both the old and new colors from within the image. In this example, everything
green was swapped with red.
Setup Instructions
1. Select Image capture mode.
2. Select the desired Capture Type and Share settings.
3. Select Effects > Color Substitution > Color Substitution. The Color Substitution task pane
appears.
4. Use the Old Color tool or the adjacent Color swatch to select the color to remove in the capture.
5. Use the New Color tool or the adjacent Color swatch to select the color to replace the old color in the
capture.
6. In Color accuracy, specify the range of colors close to the old color to include in the substitution.
Select the default value of 100% to use only the exact color identified. Select a lower value to increase
the range of colors for the color substitution.
7. Enable the Swap colors option.
8. When the desired effect is achieved, click Close.
9. Click the Capture button or press the capture hotkey. The capture is sent to the selected Output.
To disable the Color Substitution effect, select Effects > Color Substitution > None.
For additional effects, see Add an Effect during Image Capture.