Extra Information

Snagit on Windows Snagit 11.1 Help File
www.techsmith.com - 50 -
Multiple Color Substitution Effect
The Color Substitution Effect replaces more than one color during the capture process.
Setup Instructions
1. Select Image capture mode.
2. Select the Capture Type and Share settings.
3. Select Effects > Color Substitution > Color Substitution. The Color Substitution task pane appears.
4. Click the Add button.
5. Use the Old Color tool or the adjacent Color swatch to select the color to remove from the capture.
(In example above, white.)
6. Use the New Color tool or the adjacent Color swatch to select the color to replace the old color in the
capture. (In example above, green.)
7. Click Add to add another color to change. Repeat steps 5 and 6 for every color to change.
8. In Color accuracy, specify the range of colors close to the Old color to include in the substitution.
Select the default value of 100% to use only the exact color identified. Select a lower value to increase
the range of colors for the color substitution.
9. Click OK.
10. Click the Capture button or press the capture hotkey. The capture is sent to the selected Output.
To disable the Color Substitution Effect, select Effects > Color Substitution > None.
For additional effects, see Add an Effect during Image Capture.