Extra Information
Snagit on Windows Snagit 11.1 Help File
www.techsmith.com - 46 -
Set Up Capture Timer for Intermittent
Capturing
Capture screens intermittently at predefined times.
In timed capture mode, the hide and repeat hotkeys operate. The Input and Output options for
Capture Timer captures must be set so that the captures can occur unattended. If Snagit
detects a combination of capture options that cannot be used, the status displays "Timer
unavailable" and the timer will not start.
1. Select Image capture mode.
2. Select the Capture Type, Share, and Effects settings.
3. Select the Timed Capture option in the Options portion of the Profile Settings pane. The Timer Setup
dialog appears.
4. Select the Capture Timer tab > Enable timer-activated captureoption.
5. To remove redundant captures (for example, when the screen does not change for a period of time),
enable Discard identical captures.
6. Specify the frequency of captures in Hours, Minutes, or Seconds.
7. Click OK.
8. Click the Capture button or press the capture hotkey.
9. Snagit automatically captures at the timed intervals you specify. Press <CTRL+SHIFT+P> to stop tak-
ing timed captures.
For additional capture options, see Set Up a Time Scheduled Capture and Set Up a Time Delayed Cap-
ture.