FCC ID : RJ5LM15 ATTACHMENT E. - USER’S MANUAL REPORT NO.
WARNING & CAUTION CAU T I ON RISK OF ELECTRIC SHOCK DO NOT OPEN CAU T I ON : T O REDU CE T H E RI SK OF ELECT RI C SH OCK , DO N OT REM OV E COV ER (OR BACK ). N O U SER-SERV I CEABLE PART S I N SI DE. REFER SERV I CI N G T O QU ALI FI ED SERV I CE PERSON N EL. This symbol is intended to alert the user to the presence of uninsulated“ dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
FCC (Federal communication commission) Information This product has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
U.S .A . U.S .F E DE RA L C OMMUNIC A T IONS C OMMIS S ION RA DIO F RE QUE NC Y INT E RF E RE NC E S T A T E ME NT INF ORMA T ION T O T HE US E R NOT E : T his equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the F CC R ules. T hese limits are designed to provide reasonable protection against harmful Interference in a residential installation.
1. Packing List 2. Safety Instructions 3. Features 4. Installation 4-1 Monitor Description 4-2 Connecting To The Computer 5. Monitor Adjustment 5-1 OSD Menu Description 5-2 Accessing the OSD Menu 5-3 OSD Menu Descripyion 6. Specifications 6-1 Monitor Specification 6-2 Video Input Connector 6-3 Resolutions Supported 7. Troubleshooting 8.
1 Packing List Your new‘ LCD Monitor’ should contain the following items: LM1530A - LCD Monitor - AUDIO CABLE - 15pin D-SUB Signal Cable - Owner’s Instructions - Power Cord AUDIO CABLE Power Cord 15pin D-SUB Signal Cable Owner’ s Instructions ※ The power cord may be changed to accommodate electrical outlets worldwide.
2 Safety Instructions Do not place heavy objects on the power cord. Do not use your monitor near water. Turn off the monitor if there is thundering and lightening. Do not open your monitor. There are no user serviceable parts inside. Opening the case might expose you a hazardous shock. Do not place the monitor on an unstable table or stand. Do not insert small conductive objects into the monitor. They might cause a short or a hazardous shock.
3 Features Screen: 15.0” viewable XGA (1024*768) resolution LCD module and space-saving slim design. Plug and Play Function: Implementation of DDC 1/2B(Display Data Channel 1/2B). Connected to the computer, the monitor automatically informs the host of its compatibility over DDC communication channel. VESA Wall Mount: This allows for the monitor to be mounted on the wall or an arm using any third party compliant device.
4 Installation 4-1. Monitor Description.
4-2. Connecting To The Computer 1. Be sure to turn your monitor, computer and all peripheral devices off before connection. 2. Connect 15-pin D-Sub connectors to both the computer and monitor. 3. Connect the DC-input terminal to the monitor and power cord to an approved AC outlet. 4. Turn on your computer and monitor. 5. Turn off your computer and monitor after use.
5 Monitor Adjustment 5-1. OSD Menu Description. Your TFT-LCD allows you to easily adjust the characteristics of the image being displayed. All of these adjustments are made using the control buttons on the front of the monitor While you use these buttons to adjust the controls, an on-screen menu shows you their numeric values as they change. OSD Me nu ◀ MENU ▶ AUTO SELECT POWER BUTTON POWER LED Me n u Opens the OSD. SELEC T SELECT A FUNCTION FROM THE OSD.
5-2. Accessing the OSD Menu 1) With the OSD off, push the MENU button to display the main OSD menu. 2) Use the“ ◀ ” and“ ▶ ” buttons to move between the function icons. As you move from one icon to another, the function name changes to reflect the function or group of functions represented by that i con.
5-3. OSD Menu Description Horizontal Position Adjust the picture image on left and right. Vertical Position Adjust the picture image on up and down. Dos Mode Set the screen on Dos Mode. OSD Transparence Change the transparency of OSD. OSD H-Position Move the OSD window to the horizontal direction. OSD V-Position Color Adjust USER Color OSD Language Exit Factory Reset Volume Move the OSD window to the vertical direction. Adjust the display color with different set of color settings.
5.4 Adjust the screen image If the“ Auto Adjust” does not display proper image, display can be set by manual adjustment. 1) Type any character on the screen by using notepad or any other word program. 2) Adjust the H/V position for proper display. 3) Use the Frequency option to adjust the image focus. 4) Setup the color, brightness and contrast as you wish to see. 5) Return to normal condition by exit the OSD menu.
6 Specifications 6-1. Monitor Specification Diagonal : 15.0” inch Viewing Image Size : 15.0” inch Native Resolution (Pixel Count) : 1024X768 LCD Module ● ● ● Pixel Pitch : 0.297 mm View Angle : Typ:65/65 degree (left/right), 50/60 (up/down) (at CR>10) Display Color : 16.
6-2. Video Input Connector 15-pin D-Sub connector is used as the input signal connector. Pin and input signals are shown in the table below. 12 Pin Number Signal Name 1 RED 2 GREEN 3 BLUE 4 N.C 5 GROUND 6 RED-GROUND 7 GREEN-GROUND 8 BLUE-GROUND 9 N.
6-3. Resolutions Supported No Mode 1 Resolution Horizental Frequency Polarity Vertical Frequency Polarity Pixel Clock (MHz) 72 0× 4 0 0 3 1. 4 7K H z N 70.0 Hz P 2 8 .3 2 2 6 4 0× 4 8 0 3 1. 4 7K H z N 60.0 Hz N 2 5 . 175 6 4 0× 4 8 0 3 5 .0 0 K H z N 66.7 Hz N 3 0 .2 4 0 4 6 4 0× 4 8 0 3 7. 8 6 K H z N 72.8 Hz N 3 1. 5 0 0 5 8 0 0× 6 0 0 3 5 . 16 K H z N/ P 56.3 Hz N/ P 3 6 .0 0 0 8 0 0× 6 0 0 3 7. 8 8 K H z P 60.3 Hz P 4 0 .0 0 0 8 0 0× 6 0 0 4 8 .
7 Troubleshooting If you have difficulty with the LCD monitor, check the following symptoms and recommended courses of action. Screen Symptom Power LED is“ off” , and no picture? Check point ▶ ▶ ▶ ▶ Please connect power cord correctly. Please check the video input terminal. Power LED is“ on” , but no picture? ▶ Brightness or contrast is adjusted right? Please adjust brightness and contrast correctly.
8 Descriptions of Technical Te rm s Plug and Play. Microsoft’ s strategy is to be able to install new hardware devices and configure peripherals easier. When connecting with computer, the monitor will initially adjust itself to the best screen settings automatically through its communication channel, DDC (Display Data Channel) DDC 1/2B(Display Data Channel 1/2B) The International Standard VESA DDC method, through which Plug & Play supported devices can be recognized and connected with the computer easier.
Vertical Scan Rate Or Refresh Rate Number of complete screens displayed per second by the monitor. A 70 Hz refresh rate will provide a flicker-free image. The higher the refresh, the better the image Horizontal Scan Rate Frequency that roughly corresponds to the number of horizontal lines a monitor can display per second. For 1024 x 768 pixels with a vertical refresh rate of 75 Hz, the horizontal scan rate is 59.8 KHz.
