User's Manual

OPS-PCAF Option Slot PC For
NEC Displays
Integrated PC For Commercial Display Applications
Document Number OPS_PCAF_9_1_11 Copyright 2011 Technovare Systems, Inc, all rights reserved
Technical Specification
OS Options
Windows Standard Embedded 7
Linux
Performance
CPU 1.6 GHz AMD Fusion Dual
Core (T56N)
GPU Integrated HD 6310
RAM 2 GB DDR3
Hard Drive 160 GB SATA
Video Output
DVI internal connector
DPORT external connector
Audio Output
Stereo internal connector
DPORT external connector
Network Connections
LAN Gigabit Ethernet
Control I/O
USB2.0 x4
RS232 internal connector
Power
Input Voltage 16 VDC
Power Dissipation 35 Watts
Environmental
Operating Temperature 0° to 40° C
Operating Humidity 80% maximum relative
humidity, non-condensing
General
Dimensions 180 mm W x 118 mm D
X 30 mm H
Unit Weight 2.5 lb
Certifications
FCC, Section 15
CE
Corporate Offices:
1675 Scenic Ave, Suite 200
Costa Mesa, CA 92626
Phone: [phone]
Fax: [phone]
URL: www.technovare.com
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help