Operation Manual

25
CAM(COMMON INTERFACE MODULE) Only
CAM Initializing
To watch scrambled channels, you will need a Conditional
Access Module(CAM) and
Smart card which is specific to that CAM from the service
provider (broadcaster).
*Note : Without a CAM and a smart card, you can watch only
Free-to-Air programs.
1. Insert a CAM into a CAM slot in the receiver and a Smart
card into the CAM.
2. The message : CAM In it will appear.
Status of the CAM
1. Go to CI Information. Press OK on the CAM to see further
information of the CAM
2. Proceed with further instructions displayed on the screen,
then you can check further details depending on the CAM in
use.
*Note : Further detailed information is not mentioned in this manual
since the information depends on the type of CAM.
CAS(CONDITIONAL ACCESS SYSTEM)
Card Initializing
To Enjoy CONAX CAS7 scrambled channels, you will need a Smart Card from the service provider
(program distributor). If you are subscribing to services from more than one service provider, you
will need a Smart Card from each one. Since a Smart Card is connected to a single service
provider, a limited range of channels will be available via it.
*Note : Without the Smart Card, you can watch only Free-to-Air programs
1. Insert the Smart Card into the receiver's slot designed for it.
2. The message ‘Smart Card Inserted’ will appear on the screen.
3. After the message ‘Smart Card Inserted’ has disappeared, you will be able to watch the
channels offered by the service provider.
The Status of the Smart Card
1. You can access detailed information about the Smart Card
using
▲/▼ button in the Main Menu.
2. Proceed with further instructions displayed on the screen to
check more detailed information depending on the Smart
Card in use.
*Note : Further detailed information is not mentioned in this manual
since the information depends on the Smart Card in use.