Operation Manual

www.technomate.com
1918
Your Digital Partner for Life
1. Press the MENU button on the remote to
display the main menu and go to Installation
2. Select Tuner Connection, the Tuner
Connection menu will appear.
3. Select your Dish setup:
Twin (using 2 satellite dishes or a Twin LNB or
Single or Loopthrough)
Tuner Setup
1. Press the MENU button on the remote to
display the main menu.
2. Use / and / button on the remote to
move in the menu.
3. Select Satellite Setup, the Satellite Setup
menu will appear.
4. Select each menu you want to edit/change.
- Satellite : Select any satellite by pressing /
buttons on the remote.
- Tuner : Select Tuner1 / Tuner2 / Both(Tuner1) / Both(Tuner2).
- Transponder : Select the Transponder.
- LNB Power : Select LNB Power ON/OFF / 13V / 18V.
- LNB Type : Select your LNB Type Single / Universal / OCS.
- LNB Freq : Select LNB oscillator frequency.
Satellite Setup
- 22KHz : Select ON/OFF of 0/22 KHz.
- DiSEqC 1.0 : Select DiSEqC 1.0 Port.
- DiSEqC 1.1 : Select DiSEqC 1.1 Port.
5. Scan : Press Red ( ) button on the remote
to begin satellite search.
6. Rename : Press Green ( ) button on the
remote to rename the selected
satellite.
7. Auto Navigation : Press Green ( ) button on the remote to begin auto
navigation.
8. Save : Press Yellow ( ) button on the remote to save the selected satellite.
9. Delete : Press Blue ( ) button on the remote to de select the selected satellite.
1. Press the MENU button on the remote to
display the main menu.
2. Use the / and / buttons on the remote
to move in the menu.
3. Select Motorized Setting, the Motorized Setting
menu will appear.
4. Select each menu you want to edit / change.
- Satellite : Select any satellite by pressing /
buttons on the remote.
- Tuner : Select Both(Tuner1) / Both(Tuner2).
- Transponder : Displays the current TP value of the selected satellite.
- DiSEqC Motor : Select DiSEqC Motor type OFF/1.2/USALS.
- Save : Press OK button on the remote to save.
5. Scan : Press Red ( ) button on the remote to begin satellite search.
6. Auto Navigation : Press Green ( ) button on the remote to begin auto
navigation.
Motorized Setting