INTRODUCTION 2 Overview Main Features EASY INSTALLATION GUIDE 4 SAFETY INFORMATION 7 CHECK POINTS BEFORE USE 9 Accessories Satellite Dish CONTROLS/FUNCTIONS 10 Front Panel Rear Panel Remote control Front Display EQUIPMENT CONNECTION 15 Connection With Antenna/ TV Set/ A/V System OPERATION 17 Getting Started System Settings Edit Channels EPG (Electronic Program Guide) Games USB Menu (How to download SW from USB) System Information Common Interface Conditional Access System DVR PIP HOW TO D
Parental, Installation & Receiver Lock Zoom function on Pause & Live channel OVERVIEW This satellite receiver is designed for using both free-to-air and encrypted channel reception. Enjoy the rich choice of more than 10,000 different channels, broadcasting a large range of culture, sports, cinema, news, events, etc. This receiver is a technical masterpiece, assembled with the highest qualified electronic parts.
How to Install a New Satellite (Fixed Non-Motorised System) Press the MENU button on the remote and press the OK button on Installation. Press OK on Satellite Setup and OK again to display a Satellite List. To add a Satellite, press the YELLOW ( )button on the remote. Press the EXIT button on the remote to exit the list. After turning ON the receiver, select a language and Country. You will be taken to the Viewing mode. Press the SAT button on the Remote and select a satellite.
If the Signal Quality is below 40%, then the settings are incorrect and the Longitude needs to be adjusted, for example : 000.2, 000.3, 000.4,5/6/7/8/9 West or East. The Latitude may also need to be adjusted. If you still have not got a signal, then the external installation (dish, etc) needs to be adjusted. How to restore default channels Be sure to read the user’s manual before starting the operation of the unit. Do not touch the power cord with wet hands as it may cause electric shock.
Place the unit horizontally. An uneven placement may cause the unit to be damaged. Do not put heavy items such as a TV on the unit. This may damage the unit. ACCESSORIES Remote control : 1 Batteries (AAA type) : 2 Power cord : 1 TM -690 2 HD -T2 User’s manual : 1 Do not leave the unit near water. Do not put water containing items such as vase on the unit. or HDMI cable : 1 Do not install the unit : Where it is subject to vibrations. Where it is exposed to direct sunlight.
REAR PANEL 1. Power : To switch the receiver between “Standby” and “Power ON” modes. 2. Standby/Power Indicators : Red in Standby mode and no light in Power-On mode. 3. Menu : To enter or exit the Main Menu. 4. Select : To open the Channel List in non-menu mode and to select/confirm an item in menu mode. Your Digital Partner for Life 5-6. VOL( / ) : To change the volume level in non-menu mode and to modify a setting in menu mode. 7-8.
REMOTE CONTROL 1. POWER : To turn the receiver On/Off. 22-23. UP & DOWN : To change channels in non menu mode and move the cursor up/down in menu mode. 2. TV/RADIO : To switch between TV and Radio modes. 24-25. LEFT & RIGHT : To change the volume level in non-menu mode. 3. MUTE : To turn the sound On/Off. 26. OK : To show the Channel List in non-menu mode and select an item or confirm in menu mode. 4. TV/SAT : To switch the TV output source between the satellite input and the UHF/VHF antenna input.
FRONT DISPLAY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CONNECTION WITH ANTENNA / TV SET / A/V SYSTEM 1. Connect the TV antenna to TV ANT IN. 17 19 18 20 22 21 2. Connect the Video and Audio of TV to the Video and Audio. Connect Red and White connector to Audio R and Audio L, and Yellow into Video port respectively. 1 Power On/Off mode. 2 It is displayed when a Satellite signal is present. 3. Connect the Component Video of your TV to Component Video of best quality.
Satellite Setup 1. Press the MENU button on the remote to display the main menu. GETTING STARTED 2. Use / and / button on the remote to move in the menu. Turn your receiver power on and proceed with system setup as follows : 3. Select Satellite Setup, the Satellite Setup menu will appear. 4. Select each menu you want to edit/change. Menu Language Setting - Satellite : Select any satellite by pressing buttons on the remote. 1. Turn on your TV and receiver. / - Transponder : Select the Transponder.
Delete Limit : Delete east and west limit. Enable Limit : Enable the saved east and west limit. Set East Limit : Edit & Save east limit by pressing / or OK buttons. Set West Limit : Edit & Save west limit by pressing / or OK buttons. - Go To : Go to the position of the saved satellite. Motorized Setting 1. Press the MENU button on the remote to display the main menu. 2. Use the / and / buttons on the remote to move in the menu. 3. Select Motorized Setting, the Motorized Setting menu will appear.
Goto Reference : Move the dish to the 0 position. - Search Type : Select the type of channel search Antenna Longitude : Edit antenna longitude by pressing Antenna Latitude : Edit antenna latitude by pressing / / you want by pressing buttons and numeric buttons. buttons and numeric buttons. channels, TV & Radio channels. ) button on the remote to begin satellite search. 3.
- Manual Scan Advance Search 1. Select the channel number or frequency Te edit and search channels on newly that you want to search by using the launched satellites or not preprogrammed UP/DOWN buttons on the remote control, satellites in the list. manually enter a frequency. 1. Press the MENU button to display the main 2. For Bandwidth, choose either 7 MHz or 8MHz memu. 2. Use For Search Type, choose from : All Channel, and / / FTA Only or TV Only. buttons to move in the menu. 3.
4. Scan : Press Red ( - RED ( ) button on the remote to begin PID Search. 5. Add TP : Press Green ( ) button on the remote to edit transponder by using numeric buttons 0~9 and 6. Delete TP : Press Yellow ( / buttons on the remote. ) : Displays all channels in current satellite. - GREEN ( ) : Displays channels sorted by alphabetical order. - YELLOW ( ) button on the remote to delete the selected transponder. - BLUE ( ) : Displays channels sorted by transponder.
FAV SUBTITLE Press FAV button on the remote to display a favorite channel list int the favorite You can press select the subtitle language of current channel. group. SLEEP FREEZE You can set the receiver to turn off after a few minutes. Press the SLEEP button to You can press this key to freeze the video. Press it again to resume the video. set a Sleep timer. - To cancel a Sleep Timer, press the SLEEP button until you set the time as “0 min”.
COLOR Adjustment A/V Output Setting Press the COLOR button on the remote to select Color Adjustment menu. This submenu allows you to specify the By using the audio/video output setting. / buttons on the remote, you can adjust the brightness, contrast and - Audio Language : Set the default audio language when selecting a channel. the color of picture. - Subtitle Language : Set the default subtitle language. - SCART : Select the SCART output.(CVBS/RGB) - Screen Format : Select the screen format.
Front Display Setting Factory Reset This sub-menu allows you to set the blue light & This sub-menu allows you to restore the factory text moving on the front display window. setting if the users encounters a problem after - Blue Light : Turn the blue light ON/OFF. changing any settings. - Text Moving : Turn the text moving ON/OFF. - Delete Radio Channels : Erase all radio channels. - Channel Number : Turn the channel number - Delete Scramble Channels : Erase all scramble ON/OFF. channels.
- Firmware update : Support download from a LAN. 1) BLUE button, appear input target IP address. 2) button to connect after input a target IP. 3) Choose a update software and (OK)button for downloading. * Note : Have to run PC tool before connect PC. EDIT CHANNELS Set Favorites This sub-menu allows you to set up favorite name and favorite lists. You can choose TV or Radio channels by pressing the TV/RADIO button. Supports is for 16 favorite groups. 1.
Rename CH / Edit PIDs Lock Channels This sub-menu allows you to rename the This sub-menu allows you to lock channels. channels and input user PID. Once the channel is locked, every time you You can switch between TV or Radio channels want to watch the channel, you will have to by pressing the TV/RADIO button on the remote. enter the password. 1.
Delete Channels AV In This sub-menu allows you to delete channels. This function allows you to view externel device * Note : If you delete a channel, you cannot watch this channel until you do a channel search again. output. - AV Input : On/Off to add or delete a AV IN Channel. 1. Press the OK button on Delete Channels, the If you selecto ON then you will see AV IN Delete Channels menu will appear. Channel in channel list. 2.
6. Press the Timer 7. In the top right window, you can see the next This sub-menu allows you to set the on/off time block. of your receiver. 1. Press the RED ( button to drop the block. 8. Press the EXIT button to quit a game. ) button in the EPG menu, the Timer menu will appear. 2. Press the / buttons to move to other / buttons to change the menus. 3. Press the selection. Sokoban - Timer No. 1-8 : Select the timer that you want to modify.
USB Menu Snake 1. Press the OK button on Snake, the game will load. 2. You can select a skill using the / buttons on the remote. 3. Press the OK button to start a game or press This sub-menu allows you to playback MP3(music) and JPEG(picture) files and to download software and channel list by connecting your USB memory stick(USB flash drive) to the USB port in the receiver. MP3 Menu the EXIT button the remote to return to the 1. Select the MP3 file that you want to listen to previous menu. 4.
SYSTEM INFORMATION Data Transfer Menu (How to download Software from USB) 1. Select the software or channel list you want to download by using the / buttons in the list. 2. Press OK button to start the software download. - YELLOW ( You can check the current information about your receiver, such as the receiver model name, software version, hardware version, manufacturing date, etc. * Note : This information is necessary when you want to download a new software or you need to repair the receiver.
CONDITIONAL ACCESS SYSTEM PVR Mode via Internal HDD or USB Card Initializing File List To Enjoy CONAX CAS7 scrambled channels, you File Playback will need a Smart Card from the service provider 1. Press the FILELIST button to open the file list. Select the file you want to playback (program distributor). If you are subscribing to services from more than one service provider, you will need a Smart Card from each one.
RWD (Rewind) Trick Mode When playing the file, press the RWD button to rewind the program (adjust the You can operate the Trick Mode while you are playing speed). playing the files. This function is available in - Choose from : x2, x4 and x8, x8 and x32 Playback mode and Time-Shift mode. Slow (1/2x, 1/4x) PLAYBACK When playing the file, press the SLOW button to slow the speed of the playback This button will display a time-banner.
File Edit Record Stop - BLUE : Press this button and edit(copy, cut) the file. 1. Press the STOP button on the remote to stop Press (OK key) button to select edit start position and one more (OK key) the recording then Record Stop will be button to select edit end position. Select cut or copy. displayed. 2. Select the recording file by OK / STOP button. 3. Press EXIT button then selected recording is stopped.
PIP Start, Stop, Change PIP screen size Press (pip key) on the remote to start PIP and “Sub Channel List” will displayed. Select the channel using (OK key) Press Exit to hide Sub Channel List. Press (pip key) on the remote to change small PIP screen size. Press (pip key) on the remote to stop PIP. Sub channel list Press (pip channel list key) on the remote to display Sub Channel List. Press (exit key) on the remote to hide Sub Channel List. 1.
Note. How to download / upload Channels If you want to download / upload Channels, Click on Channels in the TM loader, then select Download / Upload. There may be various reasons for the abnormal operation of a set-top box. If it does not work properly, check if according to the procedures shown in the table below. * Downloading Channels PC to TM-6900HD Series. 1. Click on Download, and then Click on Browse in the TM Loader. 2. Select the file from where you saved it. 3. Turn on the satellite receiver. 4.
1) Check if the scart is connected, 2) Check the A/V settings on your television is correct, 3) Scart cable could be faulty there fore replace of in doubt. I get the message ‘no signal’ displayed? 1) Check if the LNB cable is inserted into the IF INPUT, 2) Check if the LNB setup menu is correctly set. 3) Your satellite Dish may be out of alignment or your LNB may be is faulty. 4) Go to Easy installatin guide and start fresh, 5) Contact your dealer / installer.
Remote control USB Power supply Rear Panel connectors Code Operating condition USB Supply(Front/Rear) Power consumption Supply voltage Supply frequency TV SCART VCR SCART Option Physical Specification Video Audio L/R Component(Y/Pb/Pr) Serial data Digital tuner input Loop-through Digital tuner Terrestrial ant input Terrestrial ant output RF modulator input RF modulator output S/PDIF HDMI USB LAN E-SATA Video input Audio L/R input Component input(Y/Pb/Pr) Size (W X H X D) Weight (Net) NEC-IR up to 7 M
INTRODUCTION 59 CONSIGNES ELEMENTAIRES DE SECURITE 59 POINTS DE CONTRÔLE AVANT L’EMPLOI 61 Nous vous remercions de nous avoir fait confiance pour l’acquisition de votre Terminal Numérique. Nous espérons qu’il vous donnera entière satisfaction durant de nombreuses années. Ce produit étant un appareil de haute technologie, il est nécessaire d’en prendre soin et de respecter les consignes élémentaires de sécurité que nous vous communiquons ci-dessous.
Ne pas installez le récepteur : A un endroit sujet à des vibrations. A la lumière du soleil directe. A l’humidité. A une température trop haute ou trop basse. ou il n y a aucune ventilation. Déplacer le récepteur d’un endroit chaud à un endroit froid provoquerq de la condensation. N’allumez pas le récepteur durant une ou deux heures, jusqu’à qu’il soit complètement sec.
Panneau Arrière 1. Power : To switch the receiver between “Standby” and “Power ON” modes. 2. Standby/Power Indicators : Red in Standby mode and no light in Power-On mode. 3. Menu : To enter or exit the Main Menu. 4. Select : To open the Channel List in non-menu mode and to select/confirm an item in menu mode. Your Digital Partner for Life 5-6. VOL( / ) : To change the volume level in non-menu mode and to modify a setting in menu mode. 7-8.
Télécommande 1. POWER : To turn the receiver On/Off. 22-23. UP & DOWN : To change channels in non menu mode and move the cursor up/down in menu mode. 2. TV/RADIO : To switch between TV and Radio modes. 24-25. LEFT & RIGHT : To change the volume level in non-menu mode. 3. MUTE : To turn the sound On/Off. 26. OK : To show the Channel List in non-menu mode and select an item or confirm in menu mode. 4. TV/SAT : To switch the TV output source between the satellite input and the UHF/VHF antenna input. 27.
Installation Satellite 4. Sélectionnez chaque menu que vous voulez éditer / changer. Raccordement avec le système A/V / antenne / TV set 1. Raccordez TV ant IN de l’appareil à l’antenne TV. 2. Raccordez vidéo et Audio de l’appareil au TV et Vidéo de la TV. Raccordez le connecteur rouge et blanc à audio R et audio L, et le jaune dans le port vidéo respectivement. 3. Raccordez votre antenne satellite. Satellite : Sélectionnez le satellite souhaité à l’aide des touches / de la télécommande.
Recherche avancée Recherche PID 1. Appuyez sur la touche menu pour faire apparaître le menu principal. 2. Utilisez les touches / et / sélectionnez dans le menu. 1. Appuyez sur la touche MENU de la télécommande pour afficher le menu principal. pour 3.Sélectionnez recherche avancée, ensuite la fenêtre suivante apparaîtra. 4. Sélectionnez chaque menu que vous voulez éditer ou changer. Satellite : A l’aide des touches / de la télécommande sélectionnez le satellite souhaité.
Sélection de programme Vous pouvez changer le programme courant par un autre programme. Dans le cas où vous voulez sélectionnez une chaîne au hasard sans savoir le nom de celle-ci, vous pouvez naviguer entre les chaînes jusqu’à ce que vous trouviez ce que vous souhaitez. Si vous connaissez le numéro de chaîne souhaitée, entrez le numéro et attendez 2 secondes jusqu’à ce que la chaîne change. Si vous connaissez le nom de la chaîne souhaitée, appuyez sur OK et la liste de chaîne apparaîtra.
EDIT CHANNELS Installation des chaînes favorites Ce sous-menu vous permet d’installer le nom préféré et les listes préférées comme vous le souhaitez. En utilisant la touche TV/Radio, vous pouvez alterner entre les modes TV et Radio. ll soutient 8 groupes favoris. Renommer ch / edit pids Se sous-memu vous permet de renommer les chaînes et entrer l’utilisateur PID. En utilisant la toche TV/Radio, vous pouvez alterner entre les modes TV/Radil.
Chaîne verrouilée Suppression de chaînes Ce sous-menu vous permet de verrouiller les chaînes. Une fois que la chaîne est verrouillée, lorsque vous essayez de la regarder ; vous devez entrer le mot de passe. En utilisant les touches TV/Radil vous pouvez alterner entre les modes TV ou Radio. En utilisant les touches SAT/FAV vous pouvez changer la liste de chaîne. Ce sous-menu vous permet de supprimer les chaînes. En utilisant les touches TV/Radio, vous pouvez alterner entre les TV/Radio.
EPG (Electronic Program Guide) Interface commune EPG (le guide électronique des programmes) CAM (modules d’accès conditionnel) Ce sous-menu vous permet de visualiser le guide électronique des programmes si il est disponible. Pour regarder les chaînes cryptées, vous avez besoin de modules d’accès conditionnel (CAM) et/ou une carte à puce d’abonnement. 1. Appuyez sur la touche EPG de la télémmande, le menu Guide Eléctronique des programmes s’affichera. 2.
TM-6902HD-T2 Super Your Digital Partner for Life TM-7102HD-T2 Super 78
