User's Guide
Table Of Contents
- Content
- Introduction
- Using the 2173 HF/LF Reader
- Connections
- Micro SD Card
- Software Development
- Troubleshooting and Maintenance
- Regulatory information
- Health and Safety Recommendations
- Waste Electrical and Electronic Equipment (wEEE)
- Warranty
- About TSL®
2173 HF/LF RFID Reader - User Guide V0.04Copyright © 2019 Technology Solutions (UK) Ltd
16
CONNECTIONS
CHANGING THE
BLUETOOTH
®
OPERATING MODE
TSL
®
Bluetooth
®
RFID Readers can be operated in
SPP mode
where the Reader is controlled by a custom-written
application or in
HID mode
, where the Reader behaves like a
Bluetooth
®
Keyboard.
The HID mode has two variants
i
:
1.
HID mode
Compatible with Android, Windows and Apple devices
2.
HID Apple mode
Compatible only with Apple devices providing an on-screen keyboard toggle
The
Bluetooth
®
operating mode of a TSL
®
RFID Reader can be changed using the steps detailed below.
PREPARATION:
Download and install the “
TSL PC Firmware Downloader
” from the Reader product download page (free, one time,
registration required)
https://www.tsl.com/downloads/tsl-products/1128-downloads/
https://www.tsl.com/downloads/tsl-products/1153-downloads/
https://www.tsl.com/downloads/tsl-products/1166-downloads/
TO SWITCH TO
BLUETOOTH
®
HID MODE:
● First delete existing pairings to the HF/LF reader
● Launch the Firmware Downloader (
Desktop Firmware Loader
)
● Connect the HF/LF reader to the computer using the supplied USB cable.
● The driver should install automatically (*)
● The downloader should prompt as the com port arrives and select the com port automatically (“COMn
arrived”)
● Select Action>Reset Bluetooth to HID mode or Action>Reset Bluetooth to HID Apple mode (wait for the
process to complete)
● Disconnect the HF/LF reader from the computer (unplug USB)
● Wake the HF/LF reader (pull trigger, blue flashing LED)
● Pair to the reader on the device (it typically appears as a keyboard icon and connects automatically)
● Scanned data should now be typed into the current application on the device
TO SWITCH TO
BLUETOOTH
®
SPP MODE:
● First delete existing pairings to the HF/LF reader
● Launch the downloader (
Desktop Firmware Loader
)
● Connect the HF/LF reader to the computer using the supplied USB cable.
● The driver should install automatically (*)
● The downloader should prompt as the com port arrives and select the com port automatically (“COMn
www.tsl.com