User's Guide

Table Of Contents

USING THE 2128P UHF RFID READER

ATTACHING DEVICES VIA THE EPOP-LOQ

MOUNT

Custom ePop-Loq

cases from TSL

allow smartphones and mobile terminals to be physically attached to the

2128P

Bluetooth

UHF RFID Reader and share direct electrical connections between the two devices.

Figure 14: ePop-Loq

component parts

Figure 15: Attaching/Detaching an ePop-Loq

case

Press in this direction to ﬁt

TO FIT A DEVICE WITH AN EPOP-LOQ

CASE TO A TSL

READER:

1. Ensure the phone / mobile terminal is fitted into its ePop-Loq

case

before

attaching the case to the 2128P

UHF RFID Reader. This prevents over-flexing of the case.

2. Make sure all of the contacts - on both the ePop-Loq

socket and stud - are clean and free from dirt or debris.

3. Align the ePop-Loq

stud with the ePop-Loq

socket - ensuring that the front of the host device is pointing

towards the antenna - and press the two parts together until they click into place.

4. To remove the ePop-Loq

case, pull in the opposite direction. Do not twist the devices when separating.

ePop-Loq

stud

ePop-Loq

socket

Pull in this direction to release

Ensure contacts

are clean and free

from dirt or debris

ePop-Loq

case

Front of the host device