User Manual

1062 User Guide.doc 1062
Technology Solutions (UK) Limited reserves the right to change its products, specifications and services at any time
without notice. Technology Solutions (UK) Limited provides customer assistance in various technical areas, but does
not have full access to data concerning the uses and applications of any customer’s products. Therefore, Technology
Solutions (UK) Limited assumes no responsibility for customer product design or for infringement of patents and/or
the rights of third parties, which may result from assistance provided by Technology Solutions (UK) Limited. No part
of this document may be reproduced in any form without the written consent of the author.
Page 22 of 39
Finally, tap and hold the Serial Port and select ‘Connect’. This will display the
Connection Information as shown below. Note the Local COM Port. This is the
port that an application will open to communicate with a Handscanner.
Tap ‘Cancel’ and confirm that the connection should be cancelled then close
BTExplorer.
4.3 Setting up a Bluetooth Connection – Intermec CN3
On the CN3 tap Start>Settings>Connections tab to get to the screen below: