User's Manual

Multi ISO RFID 1059 User Guide.doc 1059
Page 5 of 22
3 Attaching to an MC70
Figure 2: Attaching to an MC70
Spring Clip
3. For semi-
permanent installation fit M2×6mm pan head
Pozidriv screws into the latch locking screw holes.
1.
Align the slots on the MC70
with the guides on the spring
clips of the RFID 1059.
2. Slid
e the RFID 1059 on to the MC70
ensuring the MC70 aligns with the
MC70 mating connector on the RFID
1059. The spring clips will push out and
then click in as the MC70 locks in
place.