User's Manual

Multi ISO RFID 1059 User Guide.doc 1059
Page 13 of 22
Symptoms Possible Cause Action
the faulty battery.
Ambient temperature is
too warm.
Move the unit to an area
where the ambient
temperature is between
0°C and 35°C.
The MC70 is not firmly
seated into the RFID
1059.
Remove and re-insert
the MC70 from the RFID
1059, ensuring it is
firmly seated.
ActiveSync cannot
connect to the MC70
ActiveSync is not
correctly configured on
the PC or the MC70.
Detach the RFID 1059
from the MC70 and try
to ActiveSync directly to
the MC70. If this does
not work then consult
the MC70 User Guide.
ActiveSync is using a
serial connection.
ActiveSync must use
USB with the RFID 1059
connected.
The MC70 is not firmly
seated into the RFID
1059.
Remove and re-insert
the MC70 from the RFID
1059, ensuring it is
firmly seated.
An accessory connected
to the RFID 1059 does
not work
The accessory uses a
serial connection to the
MC70.
The accessory is not
compatible with the
RFID 1059 because
only the USB port is
available on the docking
connector.
The MC70 is not firmly
seated into the RFID
1059.
Remove and re-insert
the MC70 from the RFID
1059, ensuring it is
firmly seated.