User's Manual

Multi ISO RFID 1059 User Guide.doc 1059
Page 11 of 22
Slide in the SAM, making sure that it is orientated correctly and then relock
the SAM socket by sliding the metal cover back away from the MC70 mating
connector:
Figure 7: Inserting the SAM
Reassemble the RFID 1059 by refitting the cover and securing it with the four
screws.
5.5 Compatible peripherals
The HF RFID 1059 is compatible with any standard Symbol peripheral that
does not use the serial port (COM1) because this is used for RFID data. The
serial port is not connected to the Docking Connector on the bottom of the HF
RFID 1059. A list of compatible peripherals for the HF RFID 1059 is available
for download from the Technology Solutions website at
http://www.tsl.uk.com/downloads.htm .
It is not possible to use the HF RFID 1059 with the vehicle cradle (part
number VCD7000-P000R). To charge the MC70 in a vehicle it is necessary to
remove the HF RFID 1059 from the MC70 or to use the Auto charge cable
(part number 25-70979-01).
5.6 ActiveSync
The MC70 with HF RFID 1059 attached can be used with ActiveSync, but the
USB rather than the serial connection must be used.
Note orientation
of SAM.