User's Manual

Page 35
CHAPTER 10 – TROUBLESHOOTING
If the image/text is out of focus or blurry:
 Remove the document from the viewing zone and place it
back again.
If the screen is blank:
 Zoom out of the image for minimum magnification.
 Prodigi could be powered off or in Standby Mode. Press
Power to power it on or to exit Standby Mode.
If colors are difficult to detect:
 Check if you have sufficient ambient light.
 Choose a different contrast or color combination in the
Settings.
 Adjust the brightness level in the Settings.
If there is a lot of glare:
 Tilt object in a different angle to reduce glare.
 Reduce the brightness level in the Settings.
 Reduce external lighting effects.
If the audio reading does not make sense:
 Make sure the Voice language is the same as your
document’s language. Change it in the Settings if necessary.
If the Desktop is not responding:
 Check all connections and make sure that they are plugged
in properly.