User's Manual

Page 8
IMPORTANT: Use caution while handling the screen to avoid
scratching it.
3. Tilt the screen forward and carefully insert the screen slider into
the Base (1). Use the Torx key to tighten the 2 screws into the
Base (2). Then, apply the masking membrane over the 2
screws (3).
4. Connect the DC cable into the DC port (1). Then, insert the DVI
cable into the DVI port and tighten the 2 included screws (2).
Use the cable clip to attach the cables behind the screen (3).
1
2
3
1
2
3