User's Manual

BrailleNote Apex BT User Guide
526
C.2 Hardware Reset.
To perform a Hardware Reset, press and hold the RESET button for at least 5 seconds.
This has the same effect as removing and reinserting the battery. All data currently in use will be
lost. The Apex will require more time to restart than it would for a Software Reset.
A beep will be heard and the message "Starting Keysoft" will be displayed.
After a short while the system will announce:
"KeySoft version 9.0x. Build (number)" followed by "Main Menu."
C.3 Clear Settings Reset.
The Clear Settings Reset is the equivalent of a Software Reset where all user settings are deleted.
This erases all configurations, but does not affect your data.
Make sure the BrailleNote BT is switched on. Hold down dots 4-5-6 and gently press the reset
switch with a pointed instrument until it clicks. The BrailleNote BT should beep immediately.
Continue to hold down dots 4-5-6.
A beep will be heard and the message "Starting Keysoft" will be displayed.
After a short while the system will announce:
"KeySoft version 9.0x. Build (number)" followed by "Main Menu."
C.4 Still doesn't start.
Telephone your BrailleNote BT Distributor for further advice.
End of Appendix C - Troubleshooting.