User's Manual

BrailleNote Apex BT User Guide
1-31
To continuously read a section of the User Guide using speech, select your starting point from the
Table of Contents or Index as discussed above, then press SPACE with G. To pause reading, press
BACKSPACE with ENTER.
You can issue the review commands while reading is in progress or after it has stopped. If you give
a command while reading is in progress, reading begins from the new position. This provides a very
convenient method of quickly panning through a section of the User Guide. If you are reading
continuously, you are able to jump forward or back through the text by sentence or paragraph
without halting the continuous reading function.
To read the User Guide continuously from the Braille display, select your starting point and press
SPACE with dots 1-2-4-5-6. To stop the Braille display advancing, press PREVIOUS and NEXT
together. You can adjust the rate at which the Braille display advances. Press PREVIOUS to slow
down and NEXT to speed up the refresh rate.
1.26.2 Location of User Guide Files.
As an alternative to accessing the Electronic User Guide through its Table of Contents or Index, you
can also read the User Guide as a number of KeyWord documents. Each chapter and appendix is a
separate KeyWord text document.
These documents are stored on the "Flash Disk" drive in a folder called "Manual".
If you wish to read the User Guide like a book rather than look up specific references, simply open
the chapter or appendix in the Book Reader like any other book file.
1.26.2.1 User Guide Version Check.
There is a simple version check built into the User Guide. Simply access the Index, and select the
"Version" entry in the usual way. When you press ENTER it will display
"This User Guide is for the BrailleNote BT using version x.x of KeySoft." If the model name
or version is not what you expected, contact your distributor.
1.26.2.2 Version.
This User Guide is for the BrailleNote BT using version 9 of KeySoft.